Displaying items by tag: acoustic panel curtains

5 years after the furnishing of Jungheinrichs new factory, Vital-Office is again the supplier for Jungheinrichs new HQ and SO. Green bamboo desks are chosen again. Rectangular desk tops with height adjustable bases are added new. And the ergonomic saddle like WEY-chair was choosen again, but in 3rd generation technique and design. Electric installation and plug-in possibilities from top of table and from below table top was a special concern. Acoustic partitions are especially made for height adjustable stand-up desks. The acoustic panel is lifted always by the highest table top. This ensures, that all sticky notes on the screens are always available to the users on both sides.

Sehr geehrte Damen und Herren,

wir möchten gerne mit Ihnen Zusammenarbeiten.

Traditionell Handwerksorientiert, können wir Ihnen folgende Akustik Produkte und Konfektionsleistungen für den Innenausbau und Möbelbau mit günstigen und flexiblen Akustikmaterial anbieten.

• PET Akustikplatten 1220x2440x9mm - 1.9kg/m² - feine Oberfläche - höchst schallabsorbierend
• vielseitig, modern und leicht zu verarbeiten
• in 19 wohlsortierten Farben für Anwendungsbereiche vom Büro bis zum Kindergarten
• ab Lager kurzfristig abrufbar
• optional mit CNC Zuschnitt (rund oder eckig) und Konfektion mit CNC Messerschneidemaschine
• optional mit CNC V-Cut Mauerwerksstrukturen für ansprechende Wandverkleidungen
• optional mit CNC V-Cut für flexible biegbare Platten
• B1 / E0 / Oekotex100 / umweltfreundlich (recyceltes PET)

In order for a room acoustic measure to be calculated and assessed realistically, well-founded acoustic physical basic knowledge and practical experience is appropriate. In particular, the initial values of reality must be determined accordingly. For sensitive areas, the measurement should be carried out professionally by an acoustic expert. Alternatively, at least a provisional measurement should be performed with a phone app repeatedly. The provisional measurement serves only as a guideline for the selection of the room materials and their absorption coefficients in the acoustic calculator. Basically, any calculation without professional measurements of the initial situation is hypothetical!

Example:

Low frequencies are absorbed differently than high frequencies. Glass surfaces (Windows) or a normal office cabinet made of chipboard in different thicknesses, when you hit the resonance of the deep tones, can act for the low frequencies absorbing. However, a correct calculation is hardly possible due to the lack of measured data of the objects. On the basis of a measurement, special depth absorbers (vibrating resonators) need to be specifically set.

The calculations are based on measured data from objects and materials. Some of these are listed in the DIN 18041 exemplary. Others are taken from various sources for their correctness and conformity with the actual existing object or material there is no guarantee.

• Area is important-small elements, for example, are simply overlooked by lower frequencies due to the long wavelength. Even with a-class absorbers, an adequately large absorbing surface is required in relation to the size of the room. In communication rooms, absorbers on the ceiling are sparingly and consciously dealt with. Here is more of a reflection desired!