Tops in matte Linoleum desktop, combined with Laminate aluminum silver.
The slightly slanted rear panel and elliptical molded base either in sanded stainless steel or aluminum or in matte lacquered black or matte Linoleum desktop material.
Tops in exclusive wood veneer like Canadian maple or Japanese Senn, combined with matte lacquered aluminum silver.
The slightly slanted rear panel in sanded stainless steel or aluminum and elliptical molded base in matte lacquered black.
Tops in exclusive wood veneer like Swiss pear combined with matte lacquered black and aluminum silver and glass.
The slightly slanted rear panel and elliptical molded base in polished chrome or sanded stainless steel.
Your personal Office individually planned. Including material and colour concept. Meeting tables, conference tables, sideboards and cabinets, in all versions, suitable for your personalized desktop.
The inclined rear panel is an interesting variant of the Base: The supply of the cable on the table top is comfortable and discreet.
The elevator is a large trough and comfortable vertical cable routing through a removable double rear panel.
Within the slightly slanted rear panel is space for cabling and plug boxes.
circon executive desks are functional designs. Their shapes and designs are designed to support the needs of modern managers.
The smaller parts at the left or right side enable more personal contact at an eye to eye level. The more you move to the middle, the more dominant you are.
In this way managers can use the design to help them being more effective with less effortless.
Personal identity and strength in a characteristic Ambience.
Energetic combination of materials for the work surface with the elliptical molded columns, supports the expression of motivation, lightness and stability.
For craftsmen we offer sheets with V-cut. These sheets are flexible and can be used for curved applications, like round reception desk, column covers, tambour doors and much more. The sheets are customized according your requirements on design and curve radius.
5 years after the furnishing of Jungheinrichs new factory, Vital-Office is again the supplier for Jungheinrichs new HQ and SO. Green bamboo desks are chosen again. Rectangular desk tops with height adjustable bases are added new. And the ergonomic saddle like WEY-chair was choosen again, but in 3rd generation technique and design. Electric installation and plug-in possibilities from top of table and from below table top was a special concern. Acoustic partitions are especially made for height adjustable stand-up desks. The acoustic panel is lifted always by the highest table top. This ensures, that all sticky notes on the screens are always available to the users on both sides.
The first Kohlbecker building was called „The Human Factory“. Because Karl Kohlbecker wanted to ensure that a good quality of life does not end at the factory gates. That‘s a kind thought. And an entrepreneurial one: because when people feel comfortable, everything runs better. Quality increases, processes become faster, the work succeeds.
No compromises have been made in the equipment of each individual desk workstation. All components are individually adaptable to humans. Due to the special geometry of the desk, very advantageous workplace groupings result. The offset of the tables to each other is very pleasant. Direct counterparts are avoided. Instead, harmoniously spacious rooms are created between the desks.
Sehr geehrte Damen und Herren,
wir möchten gerne mit Ihnen Zusammenarbeiten.
Traditionell Handwerksorientiert, können wir Ihnen folgende Akustik Produkte und Konfektionsleistungen für den Innenausbau und Möbelbau mit günstigen und flexiblen Akustikmaterial anbieten.
In order for a room acoustic measure to be calculated and assessed realistically, well-founded acoustic physical basic knowledge and practical experience is appropriate. In particular, the initial values of reality must be determined accordingly. For sensitive areas, the measurement should be carried out professionally by an acoustic expert. Alternatively, at least a provisional measurement should be performed with a phone app repeatedly. The provisional measurement serves only as a guideline for the selection of the room materials and their absorption coefficients in the acoustic calculator. Basically, any calculation without professional measurements of the initial situation is hypothetical!
Example:
Low frequencies are absorbed differently than high frequencies. Glass surfaces (Windows) or a normal office cabinet made of chipboard in different thicknesses, when you hit the resonance of the deep tones, can act for the low frequencies absorbing. However, a correct calculation is hardly possible due to the lack of measured data of the objects. On the basis of a measurement, special depth absorbers (vibrating resonators) need to be specifically set.
The calculations are based on measured data from objects and materials. Some of these are listed in the DIN 18041 exemplary. Others are taken from various sources for their correctness and conformity with the actual existing object or material there is no guarantee.
Each conference room is a representation of distinctive style and vision utilizing systems from the Circon Executive Product Line. Size, form and material/composition are developed according to individual customer needs and demands.
Various table styles are possible. Elliptical, Oval and Boat-form with elliptical feet sections can be realized in chrome, aluriffel or painted. All table sizes are feasible. The Oval-Office Project in Hamburg is a successful example where an oval 11,6 m- long table veneered in Swiss pear tree was designed to accomodate 38 persons in their executive suite conference room.
Fragrant real hay, hay flowers and mosses applied directly to vitAcoustic absorber plates. Another versatile way of experiencing real natural products with all senses (seeing, touching, smelling). The special patented preservation and coating method opens up completely new design options. And the vitAcoustic natural-coated absorber plates can be used in all vitAcoustic applications, such as 3d frames, acoustic roller shutter cabinets, panel curtains for room division and flexible partitions and partitions. Made to measure: natural elements transparent or semi-transparent on colored vitAcoustic absorber plates. Design your individual acoustic nature picture with the 19 vitAcoustic colors and real hay, hay flowers and moss. You can choose between opaque and transparent. For projects, we also offer individual adjustments, eg semi-transparent. Very individual ideas can be implemented by coating the panels with various genuine natural materials such as hay, hay flowers and moss.
Vital Office GmbH
D-75334 Straubenhardt, Holzbachtal 204
+49 7248 93566-90
+49 7248 93566-97
Vital Office Hongkong Limited
Rooms 05-15,13A/F, South Tower, World Finance Centre, Harbour City, 17 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong
Vital-Office Shanghai Co.,Ltd
上海新饰力办公用品有限公司
Wechat ID: Vital-Office
We changed to our new Portal. Many content still needs to be copied to this new Portal. For your convenience, you can access the content of our old internet pages through the link below.
www.vitaloffice.net (-09.2014)
All prices are EXCLUDING VAT.