Displaying items by tag: varitable meeting table

In order for a room acoustic measure to be calculated and assessed realistically, well-founded acoustic physical basic knowledge and practical experience is appropriate. In particular, the initial values of reality must be determined accordingly. For sensitive areas, the measurement should be carried out professionally by an acoustic expert. Alternatively, at least a provisional measurement should be performed with a phone app repeatedly. The provisional measurement serves only as a guideline for the selection of the room materials and their absorption coefficients in the acoustic calculator. Basically, any calculation without professional measurements of the initial situation is hypothetical!

Example:

Low frequencies are absorbed differently than high frequencies. Glass surfaces (Windows) or a normal office cabinet made of chipboard in different thicknesses, when you hit the resonance of the deep tones, can act for the low frequencies absorbing. However, a correct calculation is hardly possible due to the lack of measured data of the objects. On the basis of a measurement, special depth absorbers (vibrating resonators) need to be specifically set.

The calculations are based on measured data from objects and materials. Some of these are listed in the DIN 18041 exemplary. Others are taken from various sources for their correctness and conformity with the actual existing object or material there is no guarantee.

• Area is important-small elements, for example, are simply overlooked by lower frequencies due to the long wavelength. Even with a-class absorbers, an adequately large absorbing surface is required in relation to the size of the room. In communication rooms, absorbers on the ceiling are sparingly and consciously dealt with. Here is more of a reflection desired!

A remarkable acoustic optimized school project. Through professional consultation by Delhom acoustique the classrooms and corridors have large sound absorbing surfaces. Besides the ceiling, at least 1 wall was made with vitAcoustic wall absorbers.

Nicely integrated in the overall bamboo design by gmp · International GmbH (Architekten von Gerkan, Marg und Partner).

The target was, that the kids can calm down and concentrate better in a quite and sound optimized acoustic environment. Whoever will visit this school will hear the difference and will want to sit down for a while and relax.

This project has been a challenge for our teams, because of the very very short delivery time for 3 floors, 30x classrooms with corridor and classroom inbuilt furniture, receptions desks, library, kitchen furniture, water dispenser, acoustic flower pots in PAC and much more.

5 years after the furnishing of Jungheinrichs new factory, Vital-Office is again the supplier for Jungheinrichs new HQ and SO. Green bamboo desks are chosen again. Rectangular desk tops with height adjustable bases are added new. And the ergonomic saddle like WEY-chair was choosen again, but in 3rd generation technique and design. Electric installation and plug-in possibilities from top of table and from below table top was a special concern. Acoustic partitions are especially made for height adjustable stand-up desks. The acoustic panel is lifted always by the highest table top. This ensures, that all sticky notes on the screens are always available to the users on both sides.

Each conference room is a representation of distinctive style and vision utilizing systems from the Circon Executive Product Line. Size, form and material/composition are developed according to individual customer needs and demands.

Various table styles are possible. Elliptical, Oval and Boat-form with elliptical feet sections can be realized in chrome, aluriffel or painted. All table sizes are feasible. The Oval-Office Project in Hamburg is a successful example where an oval 11,6 m- long table veneered in Swiss pear tree was designed to accomodate 38 persons in their executive suite conference room.